clc bricks machinery,foam generator,foam concrete machinery,clc manufacturers machinery Dahanu Nandgaon Thane Panvel Alibag Aurangabad Kelwa Dighi (Pune) Bassain Jawaharlal Nehru (Nhava Sheva) Goa Akola Bhiwandi Pimpri Newapur Shriwardhan Jalgaon Tarapur Warora Thana Navi Mumbai Bandra Osmanabad Nagapur Karanja Belapur Vengurla Ratnagiri Miraj Jaitapur Trombay Nasik Kalyan Pune Manori Bhusaval Nanded Mumbai (ex Bombay) Waluj (Aurangabad) Kolhapur Borya Borliai-Mandla Arnala Sholapur Wada Varsova Daulatabad Nhave Ahmednagar Nagpur
for buying foam generator,clc bricks machinery,foam concrete machinery in Maharashtra
please
contact: 09966871942
visit: www.sourceinfratech.com
clc block or brick :- a concrete masonry unit,any one of external dimensions of which is greater than the
corresponding dimension of a brick as specified in IS3952 and of such size and mass as to permit
it to be handled by one man. further more to avoid confusion with slabs and panels, the height of the block shall not
exceed either its length or six times its width.
clc block density- the density calculated by dividing the mass of an oven dry block by the overall volume,
including the holes or cavities and end recesses.
Drying Shrinkage:- the difference between the lenght of speciman which has been immersed in water
and then subsequently dried to constant length, all under specified conditions, expressed as a percentage of the dry
lenght of the specimen.
please
contact: 09966871942
visit: www.sourceinfratech.com
clc block or brick :- a concrete masonry unit,any one of external dimensions of which is greater than the
corresponding dimension of a brick as specified in IS3952 and of such size and mass as to permit
it to be handled by one man. further more to avoid confusion with slabs and panels, the height of the block shall not
exceed either its length or six times its width.
clc block density- the density calculated by dividing the mass of an oven dry block by the overall volume,
including the holes or cavities and end recesses.
Drying Shrinkage:- the difference between the lenght of speciman which has been immersed in water
and then subsequently dried to constant length, all under specified conditions, expressed as a percentage of the dry
lenght of the specimen.
Comments
Post a Comment