our new business

-
please visit our website : https://clonejewellery.com/

CONSTRUCTIONS METHODS IDEAS FOR EARRINGS IN ANDHRA PRADESH

  • September 29, 2018
    •  
  • By: clonejewellery
    •  
  • Category: Uncategorized
    •  
  • Comments: 0
CONSTRUCTIONS METHODS IDEAS FILE FOR EARRINGS IN ANDHRA PRADESH
SMOOTHAND FLAT: The piece can be cut from a flat sheet with a saw; it will be the same thickness through  out. The saw can also be used to cut any decorative patterns.
CURVED: Sheet metal can be annealed (softened)and then curved or shaped by the use of different stakes and metal or wooden blocks.
THREE DIMENSIONALS: If the piece has some areas that will be thicker than others ,it can be made using any casting technique or thicker sheet metal and wire.
PATTERNED SURFACE: A  patterned surface can be applied to the sheet metal before it is cut out or shaped, using a rolling mill, hammers, or punches.
DECORATIVE SURFACE: Wires or smaller pieces of metal can be applied to sheet metal, before cutting or after shaping.
FITTINGS AND FINDINGS: The fittings and findings are the ear posts or clips ,pin fittings, chain fastenings, jump ear ringss, toggles, and so on. These are usually the last piece to be added to any other type of constructions.
ORDER OF CONSTRUCTIONS
As well as the methods of constructions, you need to think about the order in which they will happen. for example, setting the stone in to a piece of jewellery is always the last thing to do apart from the final polish. Every thing else should already be in place. The reason for this is that few stones can withstand heat from soldeear ear rings or immersion in pickle.

MAKING AA WORKING DRAWING OF EAR EAR RINGSS
THE METHOD of constructions often dictated by the design .there may be several parts, each constructed differently. Plan which must be made first and how they will fit together.
1.the  ear rings may be made of separate parts- in this case, the ear rings comprises four parts .first draw the round shank of the ear rings to scale.
  1. the top is formed from a shaped and textured disk . make scale drawings of this from above and from the side to show how it curves.

Comments

Post a Comment

Popular posts from this blog

WATER TREATMENT PLANTS INDIA

-
Water treatment plant We at Fluid Systems are occupied with assembling and providing a wide scope of Water Treatment Plants, Sewage Treatment Plants, Effluent Treatment Plants and Packaged Water Treatment Plants. Aside from these we likewise offer bundle sewage treatment, joined sewage cum nourishment squander treatment plants and consolidated sewage cum emanating treatment plants. We additionally offer compelling turnkey answers for these plants to our customers. Our whole scope of plants and administrations are broadly requested in pharmaceutical industry, concoction producing industry and nourishment handling industry to give some examples. Our gigantic accomplishment right now division is exclusively credited to the assets possessed by us and our labor being one of them. We have a group of experts who have colossal mastery in dealing with the advanced assembling process and later in giving strong turnkey administrations to our customers. We have a superb framework to config
Read more

foaming agent for clc blocks and project report,how to make protein based foaming agent ,foaming agent for clc light weight concrete bricks,foaming agent ratios,foaming agent for roof insulation and wall panels,foaming agent raw materials,clc bricks manufacturing process contact:09966871942,8712383363 foaming agnet is our unique enzyme based foaming agent. This Foaming Agent is manufactured in a unique fermentation process and not through the main used method of acid hydrolyzes. Our Making process enables us to separate exactly the needed proteins for specific characteristics (stability, foaming characteristics, etc.) according to their molecular weight. This method leads to excellent products with advanced characteristics and competitive prices. It causes no chemical reaction with the surrounding matrix but serves solely as wrapping material for the air to be encapsulated in the concrete (mortar) Features: protein based foaming agent it is used for cellular light weight bricks/blocks or foam concrete bricks/blocks oam density 80-90gms/lts foam density 80-90gms/lts ratio around 1:45 ratio Foam generated with our protein based foaming agent with mixing of air and water is stable. it is added into cement slurry and blended with blender to form a homogeneous dispersion. is safe for use and has no harmful effect on human being. It can be successful treated in biological waste water treatment systems after proper dilution. Stability: Stability of bubbles is 1.0 to 3.0 hours, depending upon the temperatures and environmental conditions Stable, long-lasting foam blanket provides excellent burnback resistance. Suitable for use with fresh or sea water. Compatible with standard proportioning and air aspirating foam making equipment. Suitable for use with foam compatible dry powder extinguishing agents. it is used for cellular light weight bricks,wall panels and roof insulation. some of our clients: we supply foaming agent and foam generator to all the cities in gujarat Mahuva,Jamnagar,Baroda,Mangrol,Bulsar,Jakhau,Tuna,Vapi,Div, Okha,Rajula,Ghogha,Bhagwa,Morbi,Bharoch,Godhra,Porbandar, Sika,Keshod ,Ahmedabad,Surat,Bhuj,Bedi,Mundra,Kundla,Jodia,Bilimora, Ankleshwar,Dwarka,Kotda, Talaja,Broach,Dadra,Halol,Veraval,Vadodara,Chhani/Vadodora, Rajkot,Sachin (Surat), Jafarabad,Bhavnagar,Cambay,Mandvi,Khambhat,Gandhidham,Kandla, Umbergoan, Kapadra(Surat)Beyt,Kodinar we supply foaming agent,clc mixer and foam generator to all the cities in maharastra

-
www.sourceinfratech.com   contact:09966871942,8712383363 foaming agnet is our unique enzyme based foaming agent. This Foaming Agent is manufactured in a unique fermentation process and not through the main used method of acid hydrolyzes. Our Making process enables us to separate exactly the needed proteins for specific characteristics (stability, foaming characteristics, etc.) according to their molecular weight. This method leads to excellent products with advanced characteristics and competitive prices. It causes no chemical reaction with the surrounding matrix but serves solely as wrapping material for the air to be encapsulated in the concrete (mortar) Features:
Read more

light weight bricks machinery manufacturers

-
Image
AAC Blocks Machinery Requirements PRIMARY MIXER  : Technical Details : Capacity : 3 cubic meter Thickness : 6mm MS plate U ‘ plates : 10mm MS Plate Blades : 8mm thickness Helical Blades shaft : 80 dia EN8 couplings : Finner Make Gear box : Beacon/ 7″ size, 30:1 Ratio Motor : CG 10HP/1450RPM SECONDARY MIXER  : Technical Details : Capacity : 1 cubic meter Thickness : 6mm MS plate Blades : 8mm thickness Helical Blades shaft : 80 dia EN8 couplings : Finner Make Gear box :  5″ size Motor : CG 7.5 HP/1450RPM Air Compressor : Technical Details : Power Rate : 3.75kw Motor : 5HP Motor Cylinders : 2 Stages Tank Capacity : 220Lts Pressure : 12Kg Brand : Sugna Digital Weighing System : Technical Details : Capacity : 2 Ton s  x  4  No’s Imported from Taiwan with Sensor Screw Conveyor for Cement : Technical Details : Dia : 168mm Length : 9000mm Power Rate : 3.5kw Motor : 5 HP Including  Gear box
Read more